Search results for "Potassium hydroxide"
showing 10 items of 10 documents
Consolidation of earthen building materials: a comparative study
2019
The consolidation and protection of mud bricks are a challenge in the field of conservation of archeological sites. One of the solutions is represented by the coverage of the entire excavation that assures a protection against mud dissolution. Unfortunately, this is not always feasible, both for economical and practical issues. For these reasons, alternative solutions are needed. In this work, laboratory experimentation has been carried out in order to test the efficacy of some products to slow down the dissolution process and increase the brick toughness. Three typologies of raw materials taken from different outcrops (one from the Republic of Azerbaijan and two from Calabria region, Italy…
Determination of low-molecular-mass aliphatic carboxylic acids and inorganic anions from kraft black liquors by ion chromatography.
2007
An ion chromatographic (IC) method with suppressed conductivity detection (CD) was developed and validated for the quantitative determination of several low-molecular-mass aliphatic mono- and dicarboxylic acids as their carboxylate anions together with some inorganic anions (chloride, sulfate, and thiosulfate) from kraft black liquors. To confirm the identification of some carboxylate anions which lack commercial model substances, a qualitative IC method with suppressed electrospray ionization mass spectrometry (ESI-MS) was also developed. The separations were performed on an IonPac AS 11-HC anion-exchange column operated at 25 degrees C within 25 min by a gradient elution with aqueous pota…
Thermal studies of sulphonamide derivative complexes
1991
Abstract A thermal study of a new series of acetazolamidate complexes of Co(II), Ni(II) and Cu(II) using the TG, DTG and DTA techniques in flowing air, static air and N 2 atmospheres is described. From the TG-DTG and DTA curves, different thermal behaviours can be observed. Although in all the complexes the processes of dehydration, deammination and pyrolysis can be clearly observed, in some cases they appear as several well-separated steps and, in others, as continuous stages which take place simultaneously. The differences observed between the pyrolytic decomposition in flowing air and in nitrogen are described. In flowing air, metal sulphate is formed from the thiadiazole ring, except fo…
Ni alloy nanowires as high efficiency electrode materials for alkaline electrolysers
2021
Abstract The fabrication and characterization of nickel-alloy electrodes for alkaline electrolysers is reported. Three different alloys (Ni–Co, Ni–Zn and Ni–W) at different composition were studied in order to determine the optimum condition. Nanostructured electrodes were obtained by template electrodeposition into a nanoporous membrane, starting from aqueous solution containing the two elements of the alloy at different concentrations. Composition of alloys can be tuned by electrolyte composition and also depends on the difference of the redox potential of elements and on the presence of complexing agents in deposition bath. Electrochemical and electrocatalytic tests, aimed at establishin…
Review of gas diffusion cathodes for alkaline fuel cells
2009
Abstract This paper gives a technical background to alkaline fuel cells (AFCs), introducing the advantages and drawbacks of the technology. AFCs offer the potential for low cost, mass producible fuel cells, without the dependency on platinum based catalysts and (currently) expensive membrane electrolytes. The AFC uses relatively low cost electrolytes based on aqueous bases such as potassium hydroxide. The inherent CO 2 sensitivity of the electrolyte can be addressed by filtering out the CO 2 from the air intake using a simple scrubber and periodically replacing the liquid electrolyte. A review of the state-of-the-art in gas diffusion cathode development is given. The overall cell performanc…
Clean-up and confirmation procedures for gas chromatographic determination of pesticide residues in contaminated waters. Part I
1993
The effects of sulphuric acid, potassium hydroxide and chromic acid on eleven organochlorine and ten organophosphorus pesticides were investigated. The treatments destroy some pesticides totally or partially, leave others unaltered and have a clean-up effect. These reactions can be used to confirm the presence of an identified pesticide. The clean-up extracts in the environmental samples facilitate the identification of the organochlorine and organophosphorus pesticides and their quantitative analysis. The results obtained for contaminated surface waters show the usefulness of these methods for multi-residue capillary gas chromatography without the need for other additional separative chrom…
Electrodeposited nickel–zinc alloy nanostructured electrodes for alkaline electrolyzer
2022
Abstract Over the last decade, as a consequence of the global decarbonization process, the interest towards green hydrogen production has drastically increased. In particular a substantial research effort has focused on the efficient and affordable production of carbon-free hydrogen production processes. In this context, the development of more efficient electrolyzers with low-cost electrode/electrocatalyst materials can play a key role. This work, investigates the fabrication of electrodes of nickel-zinc alloys with nanowires morphology cathode for alkaline electrolyzers. Electrodes are obtained by the simple method of template electrosynthesis that is also inexpensive and easily scalable.…
Hydrothermal Synthesis of ZnO Crystals from Zn(OH)2 Metastable Phases at Room to Supercritical Conditions
2014
The originality of this work is to highlight the effect of temperature and pressure on the size and morphology of hydrothermal ZnO particles from ambient to supercritical conditions (T > 374 °C and P > 221 bar) using a unique continuous one-step process. Experiments were carried out from zinc nitrate (Zn(NO3)2) and potassium hydroxide (KOH) solutions in the ranges of 1–300 bar and 30–400 °C. The as-prepared particles of ZnO (flower, ellipsoid, and sphere) and e-Zn(OH)2 (polyhedral) sized from nano to micrometers were characterized by X-ray diffraction and electronic microscopy. The wulfingite phase (e-Zn(OH)2) was detected inside some powders especially at room temperature for higher pressu…
Determination of total ribonucleotide pool in plant materials by high-pH anion-exchange high-performance liquid chromatography following extraction w…
2005
A new, improved method that only requires a potassium hydroxide extraction procedure is presented for the analysis of a full nucleotide pool in plant materials. Quantification was performed by high-pH anion-exchange chromatography (HPAEC) with UV detection after a potassium hydroxide extraction, and allowed the quantification of 13 linear ribonucleotides in a single run. The method has been validated by comparison of six extraction methods and also by measurement of the intracellular nucleotide levels of three plant species (cell cultures and leaves). The evolution of the nucleotide pool of Nicotiana tabacum cell culture during growth has also been measured, and showed an increase in the po…
Determination of tyrosine through a FIA-direct chemiluminescence procedure.
2003
A new FI-direct chemiluminescence method is proposed for the determination of tyrosine, based on the oxidation of the amino acid by K(3)Fe(CN)(6) in potassium hydroxide medium, at room temperature and enhanced by the presence of beta-cyclodextrin and formic acid. The dynamic range was linear over the range 1.0-10.0 mgl(-1). A large study of the influence of foreign compounds was performed, including amino acids; and, the method showed high selectivity. The reproducibility between days resulted in a rsd (in slope%) of 4.8 and the repeatability with a rsd (n=50, 10.0 mgl(-1)) of 3.1%, the LOD (s/n=3) was 50 mugl(-1) and sample throughput 98 h(-1).